CS2308_TSB_R5

GROUP
MODEL
Customer Satisfaction
2011-2021MY
Sedona (VQ, YP)
NUMBER
DATE
2308 (Rev 5, 3/15/2024)
April 2023
TECHNICAL SERVICE BULLETIN
SUBJECT:
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC
UPGRADE & DECAL INSTALLATION (CS2308)
 NOTICE
This bulletin has been revised to include additional information. New/revised sections of this
bulletin are indicated by a black bar in the margin area.
This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body
Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010
through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through
July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition
start logic to the vehicle's system operation which activates when the vehicle is locked. Follow the procedure
outlined in this publication to apply the improved logic to the ‘IBU-BCM’ system using the KDS ECU Upgrade
function as described in this bulletin. For confirmation that the latest reflash has been applied to a vehicle you
are working on, verify the ROM ID using the table on pages 3 and 4 of this bulletin.
Window decals should also be applied to both front windows in accordance with the instructions on page 8 to
indicate this anti-theft S/W logic upgrade has been completed (unless a customer specifically requests they
not be installed). An initial supply of window decals will be shipping directly to dealers. Should there be a
delay in receipt of this supply, please track any customers that may need window decals installation upon
receipt of the decals.
 NOTICE
To assure complete customer satisfaction, always remember to refer to KDealer+ Warranty
Coverage (validation) Inquiry Screen (Service → Warranty Coverage → Warranty Coverage Inquiry)
for a list of any additional campaigns that may need to be performed on the vehicle before returning
it to the customer.
A printed copy is for reference only; publication information can be updated at any time.
Always refer to KGIS for the latest information. After logging in kdealer.com, the newest technical
publications are listed in ‘Service Releases’ and has the latest service information that has been released.
Page 2 of 11
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
SUBJECT:
AND DECAL INSTALLATION (CS2308)
ECU Upgrade Procedure:
 IMPORTANT
Since the launch of this software upgrade, Kia initially identified a compatibility issue involving
vehicles equipped with a Kia Genuine Remote Start Accessory which results in the activation of
the burglar alarm when the remote start is used. Kia has rectified the Kia Genuine Remote Start
Accessory compatibility issue. Refer to CS2310 Remote Start Control Module Upgrade for AntiTheft Logic Compatibility.
To correct this condition, the ECU should be reprogrammed using the KDS
download, as described in this bulletin.
Upgrade Event Name
680. YP BCM UPGRADE FOR NON-IMMO VEHICLE
682.VQ IPM UPGRADE FOR NON-IMMO VEHICLE
 NOTICE
•
Confirm a fully charged battery (12.3 volts or higher is necessary) is used or utilize a fully
charged jump starter box connected to the battery.
•
Ensure the KDS GDS is sufficiently charged at 60% or higher prior to reflash.
•
All ECU upgrades must be performed with the ignition set to the ‘ON’ position unless otherwise
stated.
•
Damaged VCI II units should not be used and promptly replaced.
•
Be careful not to disconnect the VCI-II connected to the vehicle during the ECU upgrade
procedure.
•
DO NOT start the engine during ECU upgrade.
•
DO NOT turn the ignition key ‘OFF’ or interrupt the power supply during ECU upgrade.
•
When the ECU upgrade is completed, turn the ignition ‘OFF’ and wait 10 seconds before
starting the engine.
•
ONLY use approved ECU upgrade software designated for the correct application.
 IMPORTANT
It is recommended to ALWAYS check the Electronic Parts Catalog (EPC) to locate the ECU Part
Number respective to Auto/Manual Mode ROM IDs. DO NOT reference the parts label affixed to
the ECU.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 3 of 11
SUBJECT:
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
AND DECAL INSTALLATION (CS2308)
ROM ID INFORMATION TABLE:
Upgrade Event #680
Model
MY
System
IMMO
ECU P/No.
ROM ID
Previous
New
1.00
1.01
1.02
1.03
1.04
95400 A9500
YP
95400 A9510
15-21
BCM
1.05
1.06
1.07
1.08
No
1.09
I.00
1.10
1.11
1.12
YP FL
95400 A9540
95400 A9550
1.00
Continued on page 4…
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 4 of 11
SUBJECT:
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
AND DECAL INSTALLATION (CS2308)
ROM ID INFORMATION TABLE:
Upgrade Event #682
Model
MY
System
IMMO
ECU P/No.
ROM ID
Previous
New
4D062, 4D063, 4D072,
4D073, 4D082, 4D083,
4D091, 4D092, 4D093,
4D101, 4D103, 4D167,
4D211, 4D212, 4D221,
4D222, 4D231, 4D232,
4D241, 4D242, 4D251,
4D252, 4D261, 4D262,
4D271, 4D272, 4D281,
4D282, 4D291, 4D292,
4D302, 4D332, 4D333,
4D342, 4D343, 4D352,
91954
VQ
11-14
IPM
No
4D353, 4D362, 4D363,
A.00
4D386, 4D387, 4D421,
B.00
4D422, 4D431, 4D432,
B.10
4D441, 4D442, 4D451,
D.00
4D452, 4D492, 4D493,
D.01
4D521, 4D522, 4D531,
91954_7.**
4D532, 4D541, 4D542,
91955_7.**
D.02
D.03
4D551, 4D552, 4D591,
4D592, 4D701, 4D702,
4D711, 4D712, 4D731,
4D732, 4D761, 4D762,
4D771, 4D772, 4D781,
4D782, 4D791, 4D792,
4D971, 4D972, 4D991,
4D992, 4D091, 4D962
4D920, 4D921, 4D930,
91955
4D931, 4D940, 4D941,
4D950, 4D951
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's ECM ROM ID
and reference the Information Table as necessary.
DO NOT perform a ‘Manual Mode’ upgrade if the ECU PN is not listed.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 5 of 11
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
SUBJECT:
AND DECAL INSTALLATION (CS2308)
 NOTICE
Prior to performing the ECU upgrade, be sure to check that the KDS is fully charged.
1.
Connect the VCI-II to the OBD-II connector,
located
under
the
driver’s
side
of
the
instrument panel.
 NOTICE
The ECU upgrade function on KDS
operates wirelessly. It is not necessary
to perform the upgrade via USB cable.
2.
With the ignition ON, turn ON the KDS tablet.
Select ‘KDS’ from the home screen.
3.
Confirm communication with VCI (A) and then
configure the vehicle (B) using the ‘AUTO VIN’
(C) feature.
B
A
C
4.
Select ‘ECU Upgrade’.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 6 of 11
SUBJECT:
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
AND DECAL INSTALLATION (CS2308)
5.
The KDS will check the server for recently
uploaded
Events
and
then
automatically
download Upgrade Event #680 YP BCM
UPGRADE FOR NON-IMMO VEHICLE or #682
VQ IPM UPGRADE FOR NON-IMMO VEHICLE.
 NOTICE
The vehicle must be identified in
Vehicle Selection to download an
Event for that vehicle.
6.
KDS
screenshot
shown
above
is
for
demonstration purposes only. Events shown in
screenshot are not applicable to this bulletin.
Select Auto Mode.
CAUTION
Do NOT attempt to perform a Manual
Mode upgrade UNLESS Auto Mode
fails. Always follow the instructions
given on the KDS in either Auto or
Manual mode.
7.
Select IBU-BCM or IPM under the System
selection menu.
D
Touch ID Check (D) and confirm that the latest
update is available.
Select Upgrade Event #680 YP BCM UPGRADE
FOR NON-IMMO VEHICLE or #682 VQ IPM
UPGRADE FOR NON-IMMO VEHICLE and
select ‘Upgrade’ to continue.
8.
The ECU upgrade will begin and the progress
of the upgrade will appear on the bar graph.
E
Upgrade part (1/2) (E) will download the
upgrade event to the VCI-II. Upgrade part (2/2)
(F) will upgrade the ECU.
CAUTION
F
Do not touch the system buttons (like
‘Back’,
‘Home’,
‘etc.’)
while
performing ECU Upgrade.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 7 of 11
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
SUBJECT:
AND DECAL INSTALLATION (CS2308)
9.
If a “Communication Fail” screen appears,
verify
that
the
communicating
VCI-II
properly.
and
KDS
are
Select
‘OK’
and
restart the from step 4.
 NOTICE
If an error notice continues to appear
or
if
the
upgrade
cannot
be
performed, DO NOT disconnect the
KDS/VCI-II. Contact GIT America Help
Desk at (888) 542-4371 or Techline.
10.
When instructed on the KDS, turn the ignition
OFF for ten (10) seconds then back on. Select
‘OK’ to continue.
11.
Once the upgrade is complete, select ‘OK’ to
finalize the procedure.
12.
When prompted, select ‘YES’ to check for
Diagnostic Trouble Codes (DTC) and erase any
DTCs stored such as EPS, ESC, and TPMS that
may have been set during the upgrade.
13.
Start the engine to confirm normal operation of
the vehicle.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 8 of 11
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
SUBJECT:
AND DECAL INSTALLATION (CS2308)
Manual Upgrade Procedure:
 NOTICE
The manual upgrade should ONLY be performed if the automatic upgrade fails.
If the automatic upgrade fails, turn the ignition ‘OFF’ for about 10 seconds then place it back in
the ‘ON’ position to reset the control unit BEFORE performing manual upgrade.
See table below for ‘Manual Mode’ passwords.
Manual Mode ECU Upgrade Passwords
No.
Menu
#680
#682
Password
YP BCM : 95400-A9500/10
9510
YP FL BCM : 95400-A9540/50
9550
VQ IPM : 91954/5-4D*** [S/W ver. A.00/B.00/B.10/D.00/D.01]
5454
VQ IPM : 91954/5-4D*** [S/W ver. 7.**]
2233
1.
Within the ECU Upgrade screen displayed, select Manual Mode.
2.
Select the IBU-BCM or IPM system under the System selection menu. Select Upgrade Event #680 or
#682 and select Upgrade to continue.
3.
Select the appropriate control unit part number with reference to the ROM ID Information Table on
page 3, and select OK.
4.
Enter the appropriate password from the Manual Mode password table above and select OK.
5.
The upgrade will begin and the progress of the upgrade will appear on the bar graph.
6.
When instructed on the KDS, turn the ignition OFF for ten (10) seconds then back on. Select OK.
7.
Once the upgrade is complete, select OK to finalize the procedure.
8.
When prompted, select YES to check for Diagnostic Trouble Codes (DTC) and erase any DTCs stored
such as EPS, ESC, and TPMS that may have been set during the upgrade.
9.
Start the engine to confirm proper operation of the vehicle.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 9 of 11
SUBJECT:
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
AND DECAL INSTALLATION (CS2308)
Decal Installation Procedure:
1.
Print this page to 100% scale.
Cut-out the template sheet along the black dotted lines.
2.
(Save the template for future use on other vehicles)
Continued on page 9.
Two (2) decals required per vehicle.
 IMPORTANT
Be sure the door window glass is dust
free and clean from any fingerprints
or smudges before applying decals to
glass surface.
Sedona (VQ, YP)
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 10 of 11
SUBJECT:
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
AND DECAL INSTALLATION (CS2308)
3a.
Confirm that the door glass is completely in the
up position.
3b.
Using masking tape (or similar no-residue
tape), adhere the template sheet to the outside
of the left driver front door glass as shown.
Note: Be sure that the template outlined edges
are flush against the inner side and bottom
door window trim.
4a.
Carefully expose leading edge of label adhesive
by simultaneously pulling back on liner and
pushing leading edge of label forward. DO NOT
TOUCH ADHESIVE.
4b.
Once approximately half of the label is
removed from the liner, position the label on
the INSIDE of the driver’s door window (aligned
to template box).
Note: Images shown are for demonstration purpose only.
The actual decal will be transparent with red outlined image.
5a.
From the outside of the vehicle, confirm that
the decal is perfectly aligned inside the
template box.
5b.
From the inside, begin to press on the decal in
a forward direction (pushing any air bubbles
out) until the label is fully applied to the window.
6.
Remove the template sheet from the door glass
and turn the paper sheet over to prepare for
use on the right passenger side.
7.
Repeat steps 3-5 for the right passenger side
door glass.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023
Page 11 of 11
CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE
SUBJECT:
AND DECAL INSTALLATION (CS2308)
Other things to consider:
Vehicles equipped with ‘aftermarket’ window tint:
Be sure to get the customer’s approval to install the ‘Kia Anti-Theft Logic’ decals if the vehicle has aftermarket window
tint installed as they will adhere to the tint film surface and not the door glass surface, and alert customer that the ‘Kia
Anti-Theft Logic’ decals may not be visible through the tint film from outside the vehicle.
For ‘California’ state vehicles only:
The Proposition 65 decal may still be present on the inner front door glass. Be sure to get the customer’s approval to
remove this decal from the inner door glass before installing the ‘Kia Anti-Theft Logic’ decals.
AFFECTED VEHICLE RANGE:
Model
Production Date Range
Sedona (VQ)
March 3, 2010 to April 4, 2014
Sedona (YP)
July 29, 2014 to July 8, 2020
REQUIRED TOOL:
Tool Name
Figure
Comments
KDS
Kia Diagnostic System
REQUIRED PART:
Part Number
Part Name
Figure
Qty
2
‘Kia Anti-Theft Logic’
(Auto-shipped to
SO230 ATL
Decal*
dealers in a roll
containing 100 qty.)
*Note: Additional orders may be made through Archway (866) 542-6268. Please track any customers that
may require window decals if unavailable at the time of the anti-theft S/W upgrade.
WARRANTY INFORMATION:
N Code: N99 C Code: C99
Model
Claim
Type
Causal P/N
Qty.
VQ
V
YP
95400
C6000
0
Repair
Labor Op
Op
Replacement
Description
Code
Time
P/N
(CS2308)
CS2308RA
IBU-BCM
0.3
S/W Logic Upgrade
M/H
+ Decal Installation
N/A
Qty.
0
CS2308RB
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: CS2308 (Rev 5) Sedona (VQ, YP) April 2023