TSB002723
Service Bulletin Details
Public Details for: TSB002723
Tsb: during the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires
- 2024 -
Models from 2024
T-SB-0027-23 Rev2 May 26, 2023 Tire Positioning Before New Vehicle Delivery Service Category General Section Pre-Delivery Service Market USA Applicability YEAR(S) MODEL(S) 2024 4Runner, 86, bZ4X, Camry, Camry HV, Corolla, Corolla Cross, Corolla Cross HV, Corolla Hatchback, Corolla HV, Crown, GR Corolla, Grand Highlander, Grand Highlander HV, Highlander, Highlander HV, Land Cruiser, Mirai, Prius, Prius Prime, RAV4, RAV4 HV, RAV4 Prime, Sequoia HV, Sienna HV, Supra, Tacoma, Tacoma HV, Tundra, Tundra HV, Venza HV ADDITIONAL INFORMATION REVISION NOTICE February 19, 2024 Rev2: Applicability has been updated to include 2024 model year Land Cruiser vehicles. August 28, 2023 Rev1: Applicability has been updated to include 2024 model year 86, bZ4X, Highlander, Highlander Hybrid, Tacoma, and Tacoma Hybrid vehicles. Any previous printed versions of this bulletin should be discarded. Introduction During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle. © 2024 Toyota Motor Sales, USA Page 1 of 2 T-SB-0027-23 Rev2 May 26, 2023 Page 2 of 2 Tire Positioning Before New Vehicle Delivery Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – Tire Positioning Procedure 1. Mark the tire installation position on the inward facing tire sidewall. Example: Front Right = FR, Front Left = FL, Rear Right = RR, Rear Left = RL 2. Install the original tires on the NEW or refinished wheels with the marked side facing inward. 3. Balance the tire/wheel assemblies. 4. Place the tire/wheel assemblies on the vehicle in the marked positions. NOTE Torque the wheel fasteners to the proper torque value in sequence. © 2024 Toyota Motor Sales, USA