A0124162071770_5
Service Bulletin Details
Public Details for: A0124162071770_5
This bulletin provides information when the mil is on, dtc P240700 leak detection pump current fluctuating,
Models from 2023
2023 AUDI Q5 |
2023 AUDI Q5 PHEV |
Models from 2022
2022 AUDI Q3 |
2022 AUDI Q5 |
2022 AUDI Q5 PHEV |
Technical Service Bulletin 01 MIL on, DTC P240700 Leak Detection Pump Current Fluctuating; Q3, Q5 PHEV 01 24 16 2071770/5 March 29, 2024. Supersedes Technical Service Bulletin Group 01 number 24-08 dated February 19, 2024 for reasons listed below. Model(s) Year Q3 2022 Q5, and Q5 e quattro 2022 - 2023 VIN Range Vehicle-Specific Equipment All Not Applicable Condition REVISION HISTORY Revision Date Purpose 5 - Revised header (Add Model Year, 2022 Q3) Revised SVM table (Added Model Year, 2022 Q3) 4 02/19/2024 Revised header (Updated customer codes for visibility) 3 11/22/2023 Revised header (Add Model Year, 2022 Q5 PHEV) Revised SVM table (Added Model Year, 2022) Customer states: • The MIL is illuminated. Workshop findings: The following DTC may be stored in the Engine Control Module, -J623- (address word 0001). • DTC P2407 (P240700) “EVAP emission control system leakage diagnosis pump current fluctuating”. No other relevant event memory entry is logged in the engine control unit. Technical Background OBD diagnostics too sensitive. Production Solution © 2024 Audi of America, Inc. Internal Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin New software in the Engine control module, -J623- (address word 0001) addressed the condition. Service For Model Years 2022 and 2023 Q5 PHEV and Model Year 2022 Q3 vehicles, this TSB replaces Pending Service Solution (PSS) TSB 2066675: 01 PSS MIL on DTC P240700 Evap leak detection pump circuit. 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the -J623- (0001) using the SVM action code as listed in the table below, if necessary: Model Q3 Old Software Old Software New Software New Software SVM Code Part Number Version Part Number Version (or higher) (or higher) 83A.906.259.D 0002 83A.906.259.D 0001 Input MY2022 Q5 PHEV 80A.906.259.AA 0001 80A.906.259.AA 0002 80A.906.259.AD 0001 80A.906.259.AD 0002 MY2022 Q5 PHEV 01A320 MY2023 Warranty Claim Type: • 110 Up to 48 Months/50,000 Miles. • G10 for CPO covered Vehicles – Verify Owner. • If the vehicle is outside of any warranty, this Technical Service Bulletin is informational only. Service Number: 2048 Damage Code: 0040 Labor Software Update (Includes checking for Operations: DTCs) 0151 0000 Time stated on the diagnostic protocol © 2024 Audi of America, Inc. Internal Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin (Max 50 TU) Diagnostic Time: Claim Comment: GFF No allowance 0 TU Road test prior to the service No allowance 0 TU Road test after the service No allowance 0 TU As per TSB 2071770/5 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Tool Number Tool Description VAS 6160/VAS 6150 VAS tester with the current version of ODIS (Windows 10) Additional Information All part and service references provided in this TSB (2071770) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. © 2024 Audi of America, Inc. Internal Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.