No. 32-24-2

Service
Technical Information
32/24
ENU
ARA2
6
ARA2 - Checking and if Necessary Replacing Three-Point Belt on Rear Left and Right
(Recall Campaign)
Model Line:
911 Cabriolet (992)
Model Year:
2023
Country/Market:
USA (C02)
Canada (C36)
Concerns:
Child safety function on the rear three-point belt and the left and right
Cause:
On the rear three-point seat belt at the left and right, there is the possibility that the automatic
seat belt extension lock for mounting a child seat does not work properly due to a manufacturing error on the seat belt retractor.
If this is the case, the belt extension lock can be switched off in an undefined manner, and the belt can
then continue to be unrolled and pulled out. As a result, the child seat is not fixed in accordance with the
specifications.
Action:
Check the rear three-point belt at the left and right and replace it if necessary.
Affected
Vehicles:
Only vehicles assigned to the campaign (see also PCSS Vehicle Information).
AfterSales
Mar 14, 2024
Page 1 of 7
6
Service
ARA2
ENU
Technical Information
32/24
Installation
Position:
Installation position for rear three-point belts (shown on 911 Targa)
Required parts
Information
No parts are required for checking the rear three-point belts.
Information
The forecast failure rate is only 0.5%.
Therefore, please order the parts required for replacing defective three-point belts only after a test and
the actual need for replacing one or both three-point belts.
The part numbers of the required parts for the respective vehicle can be seen in the assigned scope.
For an overview of the campaign scopes, see:  Technical Information 'Warranty processing'
Required tools
•
Mar 14, 2024
Page 2 of 7
Torque wrench, 2-10 Nm (1.5-7.5 ftlb.), e.g., V.A.G 1783 - torque wrench, 2-10 Nm
(1.5-7.5 ftlb.)
AfterSales
Service
Technical Information
•
•
32/24
ENU
ARA2
6
Torque wrench, 6-50 Nm (4.5-37 ftlb.), e.g. V.A.G 1331A - torque spanner, 6-50 Nm (4.5-37
ftlb.)
T10118 - Assembly tool
Check the rear three-point belt at the left and right
Work
Procedure:
Information
The test procedure is shown as an example. The following test must be performed on both three-point
rear left and right belts.
1
Insert the three-point belt into the belt buckle using
the belt buckle and ensure that it locks  Closing
three-point belt.
Closing three-point belt
2
Pull out the belt strap completely  Pulling out
belt strap to activate the child safety function (ALR
automatic locking retractor).
Pulling out belt strap
AfterSales
Mar 14, 2024
Page 3 of 7
6
Service
ARA2
ENU
3
Technical Information
32/24
Slowly allow the belt to roll up, making sure that a
click can be heard during retraction  Rolling up belt
strap.
The belt strap must be held in place by hand.
Rolling up belt strap
4
As soon as the belt strap is retracted, check whether
it can be pulled out again or is locked  Pulling out
belt strap and checking belt lock.
If it is found during the inspection of a three-point belt that
the belt does not lock, the affected three-point belt must
be replaced. To do this, continue with:
•
•
Replacing rear three-point belt at the left and / or
replacing rear three-point belt at the right
See  Technical Information 'Replacing rear three-point
belt'.
If the belt strap is locked and a click can be heard when the
three-point belt is retracted:
Pulling out belt strap and checking belt lock
Information
The test must be carried out ten times on both three-point rear belts.
•
Repeat steps 1 to 5 ten times on both three-point belts.
Information
If the child safety feature does not meet the specifications even once during the ten checks, the affected
three-point belt must be replaced.
If it can be confirmed after ten checks that the child safety function of the rear three-point belts works
according to specifications, they do not need to be replaced.
Mar 14, 2024
Page 4 of 7
AfterSales
Service
Technical Information
32/24
ENU
ARA2
6
If both rear three-point belts function according to specifications, the action must be completed as
follows:
•
•
Entering campaign in Warranty and Maintenance logbook
Scope 1
Replacing rear three-point belt
Work Procedure: 1
Replace the rear three-point belt at the left and / or right.
911, Coupé: Replace the rear three-point belt at the left and / or right.
 Workshop Manual '69121901 Removing and installing rear three-point belt (Coupé)'
Scope 2 or 3
911 Cabriolet: Replace the rear three-point belt at the left and / or right.
 Workshop Manual '69121915 Removing and installing rear three-point belt (Cabriolet)'
Scope 4, 5 or 6
911 Targa: Replace the rear three-point belt at the left and / or right.
 Workshop Manual '69121911 Removing and installing rear three-point belt (Targa)'
Scope 7, 8 or 9
2
Enter the campaign in the Warranty and Maintenance logbook.
Warranty processing
Information
The specified labor times were determined specifically for carrying out this campaign and include all
necessary preliminary and subsequent rework. The labor times may differ from the labor times published
in the Labor Operation List in PCSS.
Scope 1:
Check the rear three-point belt at the left and right
Labor time:
Check the rear three-point belt at the left and right
Labor time: 28 TU
 Damage Number ARA2 099 000 1
Scope 2-3:
Not relevant for this vehicle type.
Scope 4:
Checking and replacing rear three-point belt at the left
AfterSales
Mar 14, 2024
Page 5 of 7
6
Service
ARA2
ENU
Technical Information
32/24
Labor time:
Checking and replacing rear three-point belt at the left
Includes:
Removing and installing roll-over protection system
Removing and installing rear side trim panel
Labor time: 395 TU
Required parts:
992857805C XXX*
Rear three-point belt at the left
1 piece
N 98925801
Cheese head bolt with multiple-tooth head
1 piece
N 98926102
Cheese head bolt with multiple-tooth head
1 piece
N 91026201
M10 hexagon collar nut
2 pieces
PAF008845
M10 x 60 internally-serrated flange screw
8 pieces
PAF008148
M8 x 30 countersunk screw
14 pieces
N 10827301
M10 x 40 countersunk screw with internal
serration
4 pieces
9A791261301
M6 x 20 hexagon socket head bolt
2 pieces
9A700775500
Cheese head bolt 12 x 15 x 18
1 piece
*The color variant of the rear three-point belt or belts required for the respective vehicle can be seen
using the vehicle ID No. in the PCSS vehicle information.
 Damage Number ARA2 99 000, Repair Code 2
Scope 5:
Checking and replacing rear three-point belt at the right
Labor time:
Checking and replacing rear three-point belt at the right
Includes:
Removing and installing roll-over protection system
Removing and installing rear side trim panel
Labor time: 395 TU
Required parts:
Mar 14, 2024
Page 6 of 7
992857806C XXX*
Rear three-point belt at the right
1 piece
N 98925801
Cheese head bolt with multiple-tooth head
1 piece
N 98926102
Cheese head bolt with multiple-tooth head
1 piece
N 91026201
M10 hexagon collar nut
2 pieces
PAF008845
M10 x 60 internally-serrated flange screw
8 pieces
PAF008148
M8 x 30 countersunk screw
14 pieces
N 10827301
M10 x 40 countersunk screw with internal
serration
4 pieces
AfterSales
Service
Technical Information
32/24
ENU
ARA2
9A791261301
M6 x 20 hexagon socket head bolt
2 pieces
9A700775500
Cheese head bolt 12 x 15 x 18
1 piece
6
*The color variant of the rear three-point belt or belts required for the respective vehicle can be seen
using the vehicle ID No. in the PCSS vehicle information.
 Damage Number ARA2 99 000, Repair Code 2
Scope 6:
Checking and replacing rear three-point belt at the left and right
Labor time:
Labor time: 415 TU
Checking and replacing rear three-point belt at the left and right
Includes:
Removing and installing roll-over protection system
Removing and installing rear side trim panel
Required parts:
992857805C XXX*
Rear three-point belt at the left
1 piece
992857806C XXX*
Rear three-point belt at the right
1 piece
N 98925801
Cheese head bolt with multiple-tooth head
2 pieces
N 98926102
Cheese head bolt with multiple-tooth head
2 pieces
N 91026201
M10 hexagon collar nut
2 pieces
PAF008845
M10 x 60 internally-serrated flange screw
8 pieces
PAF008148
M8 x 30 countersunk screw
14 pieces
N 10827301
M10 x 40 countersunk screw with internal
serration
4 pieces
9A791261301
M6 x 20 hexagon socket head bolt
2 pieces
9A700775500
Cheese head bolt 12 x 15 x 18
2 pieces
*The color variant of the rear three-point belt or belts required for the respective vehicle can be seen
using the vehicle ID No. in the PCSS vehicle information.
 Damage Number ARA2 99 000, Repair Code 2
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2024 Porsche Cars North America, Inc.
AfterSales
Mar 14, 2024
Page 7 of 7