SSM 52354

Service Bulletin Details

Public Details for: SSM 52354

Some 2023 bronco vehicles may exhibit diagnostic trouble code (dtc) U2101 stored in accessory protocol interface module (apim) and/or telematics control unit (tcu) after tcu module programming with no additional symptoms present. This may b


- 2023 -

Models from 2023
2023 FORD BRONCO 
3/27/24, 10:48 AM
2023 Bronco
SSM 52354 2023 Bronco - U2101 DTC Stored In The APIM And/Or TCU After
TCU Module Programming
Some 2023 Bronco vehicles may exhibit diagnostic trouble code (DTC) U2101 stored in accessory protocol
interface module (APIM) and/or telematics control unit (TCU) after TCU module programming with no
additional symptoms present. This may be due to the TCU configuration. To correct the concern, download and
run the TCU-Telematics Control Unit (TCU) Module Configuration application using Ford Diagnosis and Repair
System (FDRS). For claiming, use causal part 14F546 and applicable labor operations in Section 10 of the
Service Labor Time Standards (SLTS) Manual.
https://www.fordtechservice.dealerconnection.com
1/1

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.