22-01-009G

Service Bulletin Details

Public Details for: 22-01-009G

This bulletin describes the procedure to replace the amp ground side coil and coil and capacitor for certain vehicles exhibiting brown foam discoloration of the sponge pad in the rear glass antenna.


- 2021 -

Models from 2021
2021 GENESIS G80
CAMPAIGN
22-01-009G
JANUARY 2022
G80 (RG3)
AMP GROUND SIDE COIL AND COIL & CAPACITOR REPLACEMENT
(SERVICE CAMPAIGN T18G)
 IMPORTANT
*****Dealer Stock and Retail Vehicles*****
Dealers must perform this Service Campaign on all affected vehicles prior to customer retail
delivery and whenever an affected vehicle is in the shop for any maintenance or repair.
When a vehicle arrives at the Service Department, access Genesis Motor America's "Vehicle
Information Screen (VIS)" screen via WEBDCS to identify open Campaigns.
Description: This bulletin describes the procedure to replace the AMP ground side coil and coil and
capacitor for certain vehicles exhibiting brown foam discoloration of the sponge pad in the rear glass
antenna.
Applicable Vehicles: Certain 2021MY G80 (RG3).
Parts Information:
Amp Ground Side Coil
96270-T1000QQH
1
Coil and Capacitor
96295-T1000QQH
1
Warranty Information:
G80
AMP GROUND SIDE COIL AND COIL
10D076R0
(RG3)
& CAPACITOR REPLACEMENT
0.4
M/H
96270-T1000
I11
ZZ3
NOTE 1: Submit Claim on Campaign Claim Entry Screen.
NOTE 2: If a part that is not covered by this service campaign is in need of replacement while
performing this service campaign and the affected part is still under warranty, please submit a separate
claim using the same repair order. If the affected part is out of warranty, submit a prior approval request
for goodwill consideration prior to performing the work.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
AMP GROUND SIDE COIL AND COIL & CAPACTOR REPLACEMENT (SERVICE CAMPAIGN T18G)
Service Procedure:
1. Carefully remove the LH and RH rear door body
side weatherstrip. Then use a screwdriver or
plastic trim remover to carefully remove the LH
and RH rear pillar trim clip.
NOTICE
If the clip has been damaged from
removal, replace it with a new one.
• Clip: 85859-3S500
• Fastener: 82315-2W000
2. Replace the AMP ground side coil.
3. Replace the coil & capacitor.
4. Reinstall parts in reverse order of removal.
5. The service procedure is complete.
TSB #: 22-01-009G
Page 2 of 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.