SSM 52430

Service Bulletin Details

Public Details for: SSM 52430

Some 2020-2023 mustang vehicles may exhibit a configuration failure when trying to program a bcm for field service action (fsa) 23c35. This may be due to the integrated diagnostic system (ids) software level. To correct this condition, make


- 2023 - 2022 - 2021 - 2020 -

Models from 2023
2023 FORD MUSTANG
Models from 2022
2022 FORD MUSTANG
Models from 2021
2021 FORD MUSTANG
Models from 2020
2020 FORD MUSTANG 
4/22/24, 11:35 AM
2020 Mustang
SSM 52430 2020-2023 Mustang - FSA 23C35 - Body Control Module (BCM)
Configuration Failures
Some 2020-2023 Mustang vehicles may exhibit a configuration failure when trying to program a BCM for field
service action (FSA) 23C35. This may be due to the Integrated Diagnostic System (IDS) software level. To
correct this condition, make sure the IDS software is at R130.04 or newer when configuring the BCM. If the
state of charge (SOC) is less than 50%, charge the battery by attaching the battery charger's negative clamp
to the engine or chassis ground and not the negative battery terminal. Refer to Workshop Manual (WSM),
Section 414-01.
https://www.fordtechservice.dealerconnection.com
1/1

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.