No. 210-20

Service
Technical Information
210/20 ENU
2130
2
Complaint - Oil Leak on Intake Side of Right Turbocharger: Replace Intake Pipe (210/20)
Change
Overview:
Release
Date
Change
0
1/19/2021
•
First publication
1
4/22/2024
•
Part number for intake
manifold adjusted
O-ring part number for
intake manifold removed
911 Turbo and 911 Turbo S
(992) added
•
•
Model Year:
As of 2020 up to 2021
Vehicle Type:
911 Carrera (992) / 911 Carrera S (992) / 911 Carrera 4 (992) / 911 Carrera 4 S (992) / 911
Targa 4 (992) / 911 Targa 4S (992) / 911 Turbo (992) / 911 Turbo S (992)
Concerns:
Intake pipe on turbocharger, right
Information:
The right turbocharger shows a leak on the intake side and there are traces of oil visible on the
turbocharger and intake pipe housing.
 Oil leak on right turbocharger
AfterSales
Apr 22, 2024
Page 1 of 3
2
Service
Technical Information
ENU 210/20
2130
Oil leak on right turbocharger
Action required: If there is a customer complaint, replace the intake pipe instead of the turbocharger..
Replacing the turbocharger or oil separator will not correct this problem.
Parts required
Parts Info:
Part No.
992145584C
Designation
Qty.
– Location
 Air guide for charge-air cooling (intake 1 ea.
pipe) including O-ring
– Right turbocharger
– 911 Carrera / 911 Carrera S
or
992145584B
992129260
Apr 22, 2024
Page 2 of 3
 Air guide for charge-air cooling (intake 1 ea.
pipe) including O-ring
– Right turbocharger
– 911 Turbo / 911 Turbo S
 Hose clamp
1 ea.
– Turbocharger
AfterSales
Service
Technical Information
210/20 ENU
2130
2
Replacing right intake pipe
CAUTION
Hot components
•
Risk of burns

Let hot components cool down.

Wear personal protective gear.
Work Procedure: 1
Replace intake pipe, see Workshop Manual '212419 Removing and installing intake manifold'
Labor position and PCSS encryption
Labor position:
I No.
APOS
Labor operation
21241912
Removing and installing right intake pipe
APOS
Labor operation
21241962
Intake pipes remove and reinstall (Turbo/S)
APOS
Labor operation
44051964
Wheels remove and reinstall (Turbo/S)
I No.
I No.
PCSS encryption:
Location (FES5)
2130B
Turbocharger B, right
Damage type (SA4)
3017
Traces of oil/grease/wax
References:
 Workshop Manual '212419 Removing and installing intake manifold'
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2024 Porsche Cars North America, Inc.
AfterSales
Apr 22, 2024
Page 3 of 3