No. 15-24-4
Service Bulletin Details
Public Details for: No. 15-24-4
Technical information on wrb1 - replacing gateway control unit - 911
Models from 2024
2024 PORSCHE 911 |
2024 PORSCHE 911 CARRERA |
2024 PORSCHE 911 CARRERA GTS |
2024 PORSCHE 911 CARRERA T |
2024 PORSCHE 911 DAKAR |
2024 PORSCHE 911 GT3 |
2024 PORSCHE 911 GT3 RS |
Models from 2023
Service Technical Information 15/24 ENU WRB1 9 WRB1 - Replacing Gateway Control Unit (Workshop Campaign) Model Line: 911 Cabrio (992) Model Year: As of 2023 up to 2024 Country / Market: USA (C02) Puerto Rico (C0A) Concerns: Gateway control unit Cause: A gateway control unit that does not meet the required market-specific requirements was installed in the affected vehicles. Action: Replace the gateway control unit. Affected Vehicles: Information Every vehicle is assigned to exactly one campaign scope. To find out the scope assigned to the relevant vehicle, see PCSS Vehicle Information. Only vehicles assigned to the campaign (see also PCSS Vehicle Information). AfterSales Apr 26, 2024 Page 1 of 3 9 Service WRB1 ENU Technical Information 15/24 Installation Position: Installation position of gateway control unit Required parts The part numbers of the required parts for the respective vehicle can be seen in the assigned scope. For an overview of the campaign scopes, see: Technical Information 'Warranty processing' Required tools Tools: • • • • • Apr 26, 2024 Page 2 of 3 Battery charger with a current rating of at least 90 A, e.g., VAS 5908 - battery charger 90 A P90999 - PIWIS Tester 4 Assembly tool T10119 Torque wrench, 2 - 10 Nm (1.5 - 7.5 ftlb.), e.g., V.A.G 1783 - torque wrench, 2 - 10 Nm (1.5 7.5 ftlb.) Torque wrench, 6 - 50 Nm (4.5 - 37 ftlb.), e.g., V.A.G 1331A - torque wrench, 6 - 50 Nm (4.5 - 37 ftlb.) AfterSales Service Technical Information 15/24 ENU WRB1 9 Replacing gateway control unit Work Procedure: 1 2 Replace the gateway control unit. For instructions, see: Workshop Manual '903519 Removing and installing gateway control unit' Workshop Manual '903555 Replacing gateway control unit' Enter the campaign in the Warranty and Maintenance logbook. Warranty processing Information The specified labor times were determined specifically for carrying out this campaign and include all necessary preliminary and subsequent rework. The labor times may differ from the Labor times published in the Labor Operation List in PCSS. Scope 1: Not relevant for this vehicle type. Scope 2: Replacing gateway control unit Labor time: Replacing gateway control unit Includes: Disconnecting and connecting battery Removing and installing trim for seat well Coding gateway control unit Labor time: 185 TU Required parts: PAB907468U Gateway control unit 1 piece N 91026201 M10 hexagon collar nut 2 pieces Damage Number WRB1 066 000 2 Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2024 Porsche Cars North America, Inc. AfterSales Apr 26, 2024 Page 3 of 3