P0001
Fuel Volume Regulator Control Circuit/Open
DTC P0001, sometimes indicated as P000100 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the air/fuel mixture causing fuel volume regulator control circuit/open.
This code is set when the engine does not respond to changes in the fuel volume regulator (FVR) control signal. This may be caused by a defective FVR, a wiring problem, or a problem with the engine computer.
Possible causes of this code include:
- Defective fuel volume regulator
- Damaged wiring harness
- Defective engine computer
- P0001: Fuel Volume Regulator Control Circuit/Open
- P0001: Fuel Volume Regulator Control Circuit Open
- P0001: Fuel volume regulator control – open circuit
- P0001 00: Fuel volume regulator control - open circuit
2014 TOYOTA CAMRY with 100000. miles
2014 Toyota Camry has triggered a diagnostic trouble code (dtc) with the following details: code P0001 description the fuel volume regulator allows the fuel system to release excessive fuel from the engine back to the fuel tank. When the engine control module (pcm) determines that the fuel volume regulator is not performing properly, the pcm will set code P0001. This alert was detected at 07:58 am on 07/17/2019 Toyota Camry has triggered a diagnostic trouble code (dtc) with the following details: code P0014 description newer vehicles use a variable timing system to adjust the timing of the intake and exhaust valves in an effort to increase fuel efficiency and performance. The engine control module (pcm) uses a camshaft position actuator to adjust the camshaft accordingly. If the camshaft does not respond as the pcm requests, the pcm will set code P0014. This alert was detected at 05:50 pm on 11/08/2019.
VISIBILITY/WIPER, SUSPENSION FUEL/PROPULSION SYSTEM