P0348

DTC P0348, sometimes indicated as P034800 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the ignition system causing camshaft position sensor a circuit high input (bank 2).

The Camshaft Position Sensor (CMP) is an electronic device used in modern engines that monitors the position of the camshaft. The Camshaft Position Sensor is located on the side of the engine near the camshaft.
The Camshaft Position Sensor is used by the engine control unit (ECU) to control the timing of the engine. The Camshaft Position Sensor sends a signal to the ECU that tells the ECU the position of the camshaft.
The Camshaft Position Sensor is a Hall Effect Sensor. The Hall Effect Sensor uses a magnet and a Hall Effect switch to sense the position of the camshaft.
The Camshaft Position Sensor is a 2-wire sensor. The Camshaft Position Sensor has a 5-volt reference voltage and a ground.
The Camshaft Position Sensor is used to monitor the position of the camshaft on Bank 2. Bank 2 is the side of the engine that has the number 2 cylinder.
The Camshaft Position Sensor is used to monitor the position of the camshaft on Bank 2. Bank 2 is the side of the engine that

• P0348: Camshaft Position Sensor A Circuit High Input (Bank 2)
• P0348: Camshaft Position Sensor "A" Circuit High Bank 2
• P0348: Camshaft Position Sensor A - Bank 2 Circuit High Input
• P0348: Camshaft position (CMP) sensor A, bank 2 – high input
• P0348 00: Camshaft position (CMP) sensor A, bank 2 - high input