P0675

Cylinder 5 Glow Plug Circuit

DTC P0675, sometimes indicated as P067500 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the transmission (gearbox) causing cylinder 5 glow plug circuit.

Possible causes of this code include:
- A defective glow plug
- A wiring problem in the glow plug circuit
- A problem with the glow plug controller
If you suspect a problem with the glow plugs, you should test them for resistance with a glow plug tester. If the resistance is not within the specified range, the glow plug is defective and should be replaced.
If you suspect a wiring problem, you should check the wiring for damage and make sure the connections are secure.
If you suspect a problem with the glow plug controller, you should test it for continuity with a voltmeter. If the controller is defective, it should be replaced.

P0675: Cylinder 5 Glow Plug Circuit
P0675: Cylinder 5 Glow Plug Circuit/Open
P0675: Glow Plug/Heater Cylinder 5
P0675: Glow plug, cylinder 5 – circuit malfunction
P0675 00: Glow plug, cylinder 5 - circuit malfunction

DTC Trouble Code Search

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

PIE0760A - ENGINE AND ENGINE COOLING
CHEVROLET: This engineering information (ei) closure ends the need for gathering further information from technicians in regard to having the check engine lamp illuminated on driver information center (dic) with dtcs P0671, P0672, P0673, P0674, P0675,