P0695

DTC P0695, sometimes indicated as P069500 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the transmission (gearbox) causing fan 3 control circuit low.

The fan control circuit is responsible for sending a signal to the fan to tell it when to turn on and off. If this circuit malfunctions, the fan may not turn on when it is supposed to, or it may turn on when it is not supposed to.
There are a few things that can cause this problem, including a bad fan control circuit, a bad fan, or a bad ground.
If you suspect that the fan control circuit is bad, you can test it by jumpering the circuit. This will bypass the circuit and allow the fan to run constantly. If the fan runs when the circuit is bypassed, the circuit is bad and needs to be replaced.
If the fan is bad, it will need to be replaced.
If the ground is bad, it will need to be fixed.

• P0695: Fan 3 Control Circuit Low
• P0695: Engine coolant blower motor 3 – circuit low
• P0695 00: Engine coolant blower motor 3 - circuit low