P0915

Gear Shift Position Circuit Range/Performance

DTC P0915, sometimes indicated as P091500 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing gear shift position circuit range/performance.

The gear shift position circuit range/performance is a problem with the gear shift position sensor. This can be caused by a wiring problem, a bad sensor, or a problem with the transmission.
To fix this problem, you will need to find and fix the source of the problem. This may require a diagnostic scan to find the cause of the problem.

  • P0915: Gear Shift Position Circuit Range/Performance
  • P0915: Gear Shift Position CKT Range/Performance
  • P0915: Gear shift position circuit – range/performance problem
  • P0915 00: Gear shift position circuit - range/performance problem

DTC Trouble Code Search
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SSM 46328 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY
    FORD: Some 2017 fusion vehicles built on or before 9-aug-2016 may exhibit dtc P0915 with vehicle stuck in park and/or buzz noise from rotary dial gearshift module (gsm). Address any additional dtcs first. Dtc P0915 sets when battery voltage is lo
  • SSM 46015 - ELECTRICAL SYSTEM
    FORD: Some 2017 fusion vehicles equipped with a rotary dial gsm and built on or before 8/9/2016 may experience a no crank/no start condition along with dtcs P0915 and/or P0814. These codes set when the gsm experiences low battery voltage at start
Previous Code: P0914 | Next Code: P0916