P0995

DTC P0995, sometimes indicated as P099500 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the transmission (gearbox) causing transmission fluid pressure sensor/switch "f" circuit high.

A transmission fluid pressure sensor/switch "F" circuit high may be caused by a defective transmission fluid pressure sensor/switch, a wiring problem, a loose or corroded connector, or a problem with the transmission fluid pressure sensor/switch wiring harness.
If a transmission fluid pressure sensor/switch "F" circuit high is detected, the DTC will set and the Check Engine Light will come on. The vehicle may also fail the emissions test.
The most common solution is to replace the defective transmission fluid pressure sensor/switch. If the problem is a wiring problem, a loose or corroded connector, or a problem with the transmission fluid pressure sensor/switch wiring harness, those problems will need to be fixed.

• P0995: Fluid Pressure Sensor/Switch F Circuit High
• P0995: Transmission Fluid Pressure Sensor/Switch "F" Circuit High
• P0995: Trans Fluid Press Sensor/Switch F Circuit High
• P0995: Transmission fluid pressure (TFP) sensor F – circuit high
• P0995: Transmission fluid pressure (TFP) switch F – circuit high
• P0995 00: Transmission fluid pressure (TFP) sensor F - circuit high
• P0995 00: Transmission fluid pressure (TFP) switch F - circuit high