P2703
Transmission Friction Element "D" Apply Time Range/Performance
DTC P2703, sometimes indicated as P270300 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing transmission friction element "d" apply time range/performance.
This code is set when the transmission controller detects that the time it takes for the friction element "D" to apply is outside of the normal operating range. Possible causes include a worn friction element, low transmission fluid level, or a malfunctioning transmission controller.
If this code is caused by a worn friction element, it will need to be replaced. If the low transmission fluid level is the cause, the fluid level will need to be corrected. If the transmission controller is malfunctioning, it will need to be replaced.
- P2703: Friction Element D Apply Time Range/Performance
- P2703: Transmission Friction Element "D" Apply Time Range/Performance
- P2703: Transmission friction element D, apply time – range/performance problem
- P2703 00: Transmission friction element D, apply time - range/performance problem
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- TSB 21-2240 - POWER TRAIN
FORD: Some 2020 escape vehicles equipped with front-wheel drive (fwd), a 1.5l ecoboost engine and an 8f24 transmission may exhibit no reverse engagement with diagnostic trouble codes (dtcs) P0766 and P2703 stored in the powertrain control module - TSB 21-2029 - POWER TRAIN
FORD: Some 2020 escape vehicles equipped with front-wheel drive (fwd), a 1.5l ecoboost engine and an 8f24 transmission built before 07-aug-2020 may exhibit no reverse engagement with diagnostic trouble codes (dtcs) P0766 and P2703 stored in the p