P2751

DTC P2751, sometimes indicated as P275100 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing intermediate shaft speed sensor c circuit no signal.

This code is set when the PCM detects a problem with the intermediate shaft speed sensor circuit. This sensor is used to measure the speed of the intermediate shaft, which is connected to the transmission.
Possible causes of this code include a bad intermediate shaft speed sensor, a bad sensor connector, a wiring problem, or a problem with the PCM.
If this code is stored, inspect the intermediate shaft speed sensor and its connector for damage. If the sensor and connector are OK, check the wiring for damage or corrosion. If the wiring is OK, test the PCM for faults.

• P2751: Shaft Speed Sensor C Circuit No Signal
• P2751: Intermediate Shaft Speed Sensor C Circuit No Signal
• P2751: Intermediate Shaft Speed Sensor "C" Circuit No Signal
• P2751: Transmission intermediate shaft speed sensor C – no signal
• P2751 00: Transmission intermediate shaft speed sensor C - no signal