P281C
Pressure Control Solenoid "H" Control Circuit Range/Performance
DTC P281C, sometimes indicated as P281C00 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing pressure control solenoid "h" control circuit range/performance.
P281C is a code indicating that the pressure control solenoid "H" control circuit range/performance is not within specification. This code is usually caused by a failed pressure control solenoid, but can also be caused by a wiring issue, a bad MAP sensor, or a bad engine control unit.
If this code is caused by a failed pressure control solenoid, it will need to be replaced. If it is caused by a wiring issue, the wiring should be checked and repaired as necessary. If it is caused by a bad MAP sensor or engine control unit, those parts will need to be replaced.
- P281C: Control Solenoid H Control Circuit Range/Performance
- P281C: Pressure Control Solenoid "H" Control Circuit Range/Performance
- P281C: Transmission fluid pressure (TFP) solenoid H – control circuit range/performance
- P281C 00: Transmission fluid pressure (TFP) solenoid H - control circuit range/performance