Recalls

Known Recall Investigations

  • Lower control arm
    Summary of information from manufacturer:manufacturer is in receipt ofone complaint and five field reports.Product report analysis states "thelower control arm from waggoner corporation appears to have a small radiusat the transition of the side wall to the ball stud nose.Current stampingsource, s.K.D., also has a small radius in the same area.S.K.D. Haschanged the trim to increase the radius to 1 inch and provide additionalstrength in the ball stud area."analysis:failure data indicates the left control arm and diesel engineapplication are over represented.All known failures have occurred at lowspeeds, or have been located as a result of an increase in the frequency ofmaintenance inspections.Ball joint separation could result in collapse offront wheel suspension and loss of vehicle control.Action: ir to gm sent 11/19/87 contact fleet owners.===
    Last updated on 2023-02-10 08:43:01

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.