Recalls

Known Recall Investigations

  • Outer tie rod failure
    Odi received complaints regarding failing tie rod ball studs on model year 2008-2011 dodge ram 2500 and 3500 vehicles resulting in loss of steering control.Chrysler concluded that misalignment of the left (driver side) ball stud on vehicles built with the cross car steering linkage system could allow contact between the bull stud and the ball housing which could weaken the stud and result in fracture.Chrysler submitted a recall notice on august 15, 2011 involving certain my 2003-2011 ram 2500 and ram 3500 pickup trucks built or repaired with the cross car steering linkage.Chrysler will inspect, repair or realign the front end of the subject vehicles as needed.Chryslers announcement of a safety recall on this matter addresses odis concerns.The odi reports cited above can be reviewed at www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification (odi) numbers:10332525, 10357937, 10366591, 10303744, 10377166, 10373240, 10343969, 10375403, 10324831, 10373546, 10370771.
    Last updated on 2024-05-11 09:06:59

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.