Recalls

Known Recall Investigations
  • Steering column assembly
    On january 25, 1994 chrysler conducted a safety recall to correct the steering shaft assembly in model year 1993 grand cherokee and grand wagoneer.The recall population was 115,000 vehicles.The defect was the molded plastic pin which connects the upper steering column shaft and the lower steering column shaft which may have been sheared/damaged prior to the installation of the steering assembly into the vehile.If this occurred, the upper steering shaft will separate from the lower steering shaft causing complete loss of the steering control of the vehicle.As a remedy, chrysler installed a restraining sleeve to limit the amount of steering shaft movement available.
    Last updated on 2024-05-11 09:12:22

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.