Recalls

Recall 106473

  • USA Recall: If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.
    Ferrara fire apparatus, inc. (ferrara) is recalling certain model year 2015-2016 inferno, igniter, cinder, ultra, and intruder vehicles built on freightliner and international chassis manufactured august 3, 2015, to april 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. these pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.

    Corrective Action:
    Ferrara will notify owners, and owners will check the strainer for missing solder at the joints. any strainers missing solder will be replaced, free of charge. the recall began on july 20, 2016. owners may contact ferrara customer service at 1-800-443-9006 or hale customer service at 1-800-533-3569.

    Additional Notes:
    Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.