Recalls

Recall 13203

  • USA Recall: Due to high steering load events, vehicles can exhibit broken steering gear attaching bolts or frame rail cracking at the steering gear attaching point increasing the risk of a vehicle crash.
    During assembly of the frame, a fillet weld that joins the inner steering gear attachment reinforcement to the frame rail, was omitted.

    Corrective Action:
    Dealers will inspect the vehicles for cracks in the frame rail. vehicles that show cracks will be equipped with reinforcement plates. vehicles that are found to be free of cracks will have a slot cut in the cross member and the fillet weld will be added.

    Additional Notes:
    Owner notification:owner notification is expected to begin during may 1997. note:owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chrysler at 1-800-853-1403.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.