Recalls

Recall 14064

  • USA Recall: This condition can cause the nut to rotate freely and lose torque. it could rotate until it is no longer connected to the front spindle and allow the front wheel to separate from the vehicle.
    Vehicle description: medium duty trucks and chassis-cabs. an automatic locking front wheel bearing adjusting nut was damaged during installation or removal by incorrect tools or an incorrect torque specification was used.

    Corrective Action:
    Dealers will replace the front wheel bearing adjusting nuts with castle nuts and cotter pins.

    Additional Notes:
    Owner notification is expected to begin april 15, 1998.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-800-392-3673.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.