Recalls

Recall 14187

  • USA Recall: The screw(s) can back out over time while the vehicle is being operated causing a change in the pressure point of the master cylinder for the clutch and/or front brake increasing the risk of a vehicle crash.
    Vehicle description: motorcycles. the adjusting screw for the pressure point of either the brake or clutch levers may not be sufficiently tight, due to grease contamination of the threads.

    Corrective Action:
    Dealers will check the adjustment screws of the front brake and clutch levers for movement. if the screws are tight, no further action will be taken. if a screw is found to be loose, it will be removed, cleaned and reinstalled with new loctite.

    Additional Notes:
    Owner notification began august 11, 1997.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117, option #5.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.