Recalls

Recall 14477

  • USA Recall: If either front wheel valve sticks, the vehicle would swerve from a straight stop when the brakes are applied.
    Corrosion of the abs hydraulic control unit can cause the solenoid valves to stick in the open position.

    Corrective Action:
    Dealers will install a plate and silicone grease injected into the solenoid cavity to eliminate the potential for this condition.

    Additional Notes:
    Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time, should contact chrysler at 1-800-853-1403.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.