Recalls

Recall 145325

  • USA Recall: If the vehicle's turning radius is increased, there is an increased risk of a crash.
    Isuzu technical center of america, inc. (isuzu) is recalling certain 2018-2020 ftr and chevrolet 6500xd vehicles. the jam nut for the steering stopper bolt on the left front knuckle may loosen and allow the bolt to back away from the steering knuckle, increasing the turning radius of the vehicle in a left turn.

    Corrective Action:
    Isuzu will notify owners, and dealers will replace the existing left and right jam nuts with a grade 8 jam nut, torque the nut to a new torque specification and apply loctite to the nut and bolt, free of charge. the recall began july 19, 2019. owners may contact isuzu customer service at 1-866-441-9638, gm owners may contact gm customer service at 1-800-862-4389. isuzu's number for this recall is v1902.

    Additional Notes:
    Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.