Recalls

Recall 153441

  • USA Recall: The fracturing of the output shaft would result in a loss of drive, increasing the risk of a crash.
    Terex advance mixer (terex) is recalling certain 2020 fdc300, fd4000, fd5000gl, and fd7000b vehicles. the axle output shafts were incorrectly heat treated, possibly causing them to fracture.

    Corrective Action:
    Terex has notified owners. owners should inspect the dana output flange for its production date. dana will replace any that are in the affected range, free of charge. the recall began january 24, 2020. owners may contact terex customer service at 1-800-678-5961.

    Additional Notes:
    Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.nhtsa is missing critical, required information for this safety recall. this information must be supplied through the nhtsa recalls portal within 5 working days of confirming its accuracy:- a statement that the defect or noncompliance can cause a vehicle crash without prior warning; or a description of whatever prior warning may occur, and a statement that if this warning is not heeded, a vehicle crash can occur (49 cfr 577.5 (f)(1)).

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.