Recalls

Recall 1645

  • USA Recall: If the caliper becomes trapped between the rear wheel and the swing arm, it could disconnect from the brake line, resulting in a loss of rear braking capability and increasing the risk of a crash.
    On certain motorcycles, the screws that attach the rear brake caliper to the rear swing arm were not tightened correctly during assembly. the screws could loosen during vehicle operation and eventually fall-out, allowing the rear caliper to separate from its mount.

    Corrective Action:
    Dealers will check the torque of the rear brake caliper attachment screws and retighten them to the proper value if necessary. owner notification began july 15, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117.

    Additional Notes:
    Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.