Recalls

Recall 19335

  • USA Recall: The safety belt attachment bolts may not support theload of rear seat passengers in the event of a sudden stop or accident; theassembly fails to comply with the static load requirements of fmvss 210, "seatbelt assembly anchorages." the inability to support the load of rear seatpassengers increases the risk of injury to seat occupants.
    The two rear inboard safety belt attachment bolts may have inadequate thread engagement into the floor pan anchor nuts.

    Corrective Action:
    Replace the two inboard safety belt anchor bolts with longer bolts on all vehicles.

    Additional Notes:
    System: interior systems: restraint safety belt anchor and attachment/ fmvss 210vehicle description: multi-purpose passenger vehicle.note: if you have any problem obtaining the needed repair, please contact thechrysler zone service office in your area. (it is listed under "serviceassistance" in your owner's manual.) a zone representative will arrange forprompt attention to your vehicle. also, please contact the national highwaytraffic safety administration's auto safety hotline at 1-800-424-9393.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.