Recalls

Recall 1988161

  • CA Recall: Steering
    The steering wheel on these vehicles may loosen on the steering shaft. when a steering wheel is removed after assembly and reinstalled, grease or oil may have been inadvertently applied to the cone-shaped friction surface of the steering shaft. grease of oil on this surface may break the friction lock if after rework the torque applied to the nut is lower than specified. a loose steering wheel could result in loss of vehicle control and a possible crash. correction: friction surfaces will be cleaned, a spring retainer will be installed and the steering wheel nut will be replaced with a self locking nut. vin range: 9bw*a030*hp000001 to kp009988

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.