Recalls

Recall 1989079

  • CA Recall: Brakes
    A full-lock, low speed turning maneuver may result in the brake caliper of the inboard front wheel contacting the front stabilizer bar, causing movement of the caliper piston and displacement of brake fluid from the caliper back to the master cylinder reservoir. this would cause increased brake pedal travel and reduced brake performance on the first brake application following the turn. after one brake application, the displaced brake pedal travel and brake performance is restored. the sequence could repeat, however, following the next low speed full-lock turning maneuver. correction: acorn type front suspension strut nuts will be installed which will serve as steering stops and eliminate the potential for stabilizer bar to brake caliper contact.

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.