Recalls

Recall 1994159

  • CA Recall: Structure
    The die cast aluminum base of the williams accelerator pedal assembly on these vehicles may fail at the mounting pads where the base is bolted to the firewall. if both mounting pads should fail, the accelerator pedal assembly would totally separate from the firewall. this could distract the driver and impair vehicle control resulting in a vehicle accident. correction: accelerator pedal assembly will be inspected and a plate will be installed between the mounting base and firewall on units where the base is not broken or cracked. should the base be broken or cracked, the accelerator pedal assembly will be replaced with a new re-designed assembly.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.