Recalls

Recall 2001079

  • CA Recall: Suspension
    On certain mustang svt vehicles, when operated in severe driving cycles such as frequent drag race type standing start acceleration, the ball joint in the rear suspension knuckle where the lower control arm attaches may be displaced longitudinally out of its installed position. if this occurs, the stress levels in the knuckle casting will increase and the casting may fracture. the corner of the vehicle will then drop and the lower control arm may contact the inside of the wheel, possibly affecting directional control. correction: dealers will install a revised rear suspension knuckle assembly with positive retention of the ball joint.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.