Recalls

Recall 2001250

  • CA Recall: Brakes
    Certain m3 vehicles that were manufactured from october 2000 to may 02, 2001. the two screws that secure the parking brake cable-mounting bracket to the backing plate were not tightened properly. as a result, the screws could loosen and eventually fall into the parking brake drum. if this were to happen, the cable-mounting bracket would no longer be fixed to the backing plate and the parking brake could no longer be applied on that side of the vehicle. it is also possible that a screw could lodge within the parking brake drum, impairing the free movement of the drum. this would produce noise, and could cause the parking brake on that side to lock up while driving. correction: dealers will replace the parking brake cable attaching screws and secure them with the proper torque.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.