Recalls

Recall 2002183

  • CA Recall: Brakes
    On certain vehicles, the parking brake assembly may not hold the vehicle in position when set. factors contributing to this possibility are as follows: 1. cracked or broken cams; 2. loose or broken anchor bolts; 3. initial shoe diameter not set properly during assembly, which can lead to progressive component damage; 4. bent adjuster levers that cannot function; 5. automatic adjuster cables that are disconnected. if this parking brake does not function properly, the vehicle may begin to roll, without warning, after the parking brake lever has been set and could cause an accident, possibly resulting in property damage, personal injury or death. correction: dealers will replace the cam, lever and bolt on all affected vehicles.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.