Recalls

Recall 2003141

  • CA Recall: Steering
    On certain vehicles, the intermediate steering shaft yoke may not have been properly seated onto the steering gear input shaft during installation. in this condition, the yoke may not be properly clamped to the input shaft. this may result in separation of the yoke from the steering gear input shaft and a loss of steering control, potentially resulting in a vehicle crash. correction: dealer will inspect the steering intermediate shaft yoke. if the yoke is not fully seated and the bolt groove and spline is visible, the intermediate shaft and bolt will be replaced as well as the bolt at the steering column connection.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.