Recalls

Recall 2003278

  • CA Recall: Brakes
    On certain vehicles, the tightening torque for the front brake caliper mounting bolts may not be adequate. this could result in the upper mounting bolt coming loose and falling out. if this occurs, it would allow the caliper to rotate on the lower mounting bolt and contact the inside of the road wheel. this would result in noticeable noise and vibration. if the vehicle continues to be driven in this condition, the lower mounting bolt could also come loose and fall out, resulting in separation of the brake caliper from the mounting bracket. this could damage the brake hose to the caliper or damage the road wheel, causing an air leak from the tire. correction: dealer will re torque the front brake caliper mounting bolts.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.