Recalls

Recall 2004198

  • CA Recall: Brakes
    On certain vehicles, two bolts that attach the front brake caliper to the steering knuckle on the left and right front wheel assemblies were not tightened adequately. if too much movement occurs between the caliper bracket and knuckle, the bolt(s) may back out or fracture. depending on whether one or both bolts back out or fracture, the result can be: 1) locking of the affected wheel during braking and an abrupt steering input in the direction of the locked wheel, 2) reduced braking and noise from the affected wheel, or 3) severing of a brake hose, increased brake pedal travel, and reduced steering control. if this were to occur, it could result in a vehicle crash without prior warning. correction: dealers will tighten both bolts to the specified torque.

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.