Recalls

Recall 2009118

  • CA Recall: Brakes
    On certain vehicles, the rear axle abs modulating valve may have been wired incorrectly - the right and left modulator valve harness pin could have been reversed at the abs electronic control unit (ecu) connector. under slippery road conditions, when in the abs mode, this wiring problem could cause one side of the rear wheels to lock, while applying little or no braking to the opposite side. this could cause a loss of vehicle control and a crash, resulting in property damage, personal injury or death. correction: dealer will reverse the harness pins inside the ecu connector.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.