Recalls

Recall 2009310

  • CA Recall: Fuel supply
    On certain vehicles, the fuel transfer pipe in the fuel tank assembly may have been kinked or over inserted into the fuel delivery module during fuel tank assembly. this could cause the vehicle to experience fuel starvation whilst indicating the presence of approximately ¼ tank of fuel on the fuel gauge. engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. correction: dealers will remove the fuel transfer pipe from the fuel delivery module, reduce the length of the pipe by 6 inches (150mm) and discard the excess pipe. the fuel transfer pipe will then be inserted into an alternative hole on top of the fuel delivery module to prevent over insertion and the tank re-assembled.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.