Recalls

Recall 2010439

  • CA Recall: Brakes
    On certain vehicles, the brake stop lamp switch is mounted on a bracket welded on the service brake pedal support assembly. this bracket is relatively close to the parking brake pedal when the parking brake pedal is fully applied. due to its proximity to the parking brake pedal, in some instances, the stop lamp switch bracket could be damaged by the operator's foot. depending on the amount of bracket deformation, this could result in the brake stop lamps remaining "on". if the deformation is significant, the service brakes could become partially engaged, resulting in brake drag with associated brake noise, vibration and/or illumination of the brake warning light. should the vehicle continue to be operated in this condition, brake drag could cause excessive heat, which may result in reduced braking performance. this could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. correction: dealers will replace the service brake pedal support assembly.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.