Recalls

Recall 2015513

  • CA Recall: Airbag
    On certain vehicles, the airbag inflator contained in the driver frontal airbag module may have been improperly stamped and/or contains a defect in the material used to manufacture the airbag inflator's metal housing, which, in the event of airbag deployment, may cause inflator components to separate. if the inflator components separate, this could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. this could also damage the airbag module, which could prevent proper deployment. failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. correction: dealers will replace the driver frontal airbag module. note: all affected units are still in the possession of dealers, and will be corrected before delivery.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.