Recalls

Recall 2016613

  • CA Recall: Structure
    On certain motorcycles, the threads of the side stand pivot bolt may be too short to engage in the locking nut, potentially allowing the side stand pivot to become loose. as a result, the side stand sensor switch may no longer detect the proper position of the stand. this could cause the motorcycle to fail to start while parked, or could cause the engine to stall while the motorcycle is in motion. additionally, it may be possible to start the engine and begin riding with the stand down. these conditions could increase the risk of a crash causing injury and/or damage to property. correction: dealers will replace the side stand pivot bolt with a new revised version that has a longer threaded portion. additionally, the torque of the side stand pivot bolt will be increased, and threadlock will be applied.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.