Recalls

Recall 2018167

  • CA Recall: Seats and restraints
    Certain vehicles equipped with power driver and passenger seats may fail to conform to canada motor vehicle safety standard (cmvss) 207 - anchorage of seats and cmvss 210 – seat belt anchorages. the front driver and/or passenger seats may have been assembled with improperly manufactured rivets to secure the seat slide rails to the forward seat feet. in the event of a crash, the rivets may break and allow the front seat(s) to separate from the seat feet, which would fail to meet the requirements of the standard(s), and could increase the risk of injury to the seated occupant. correction: for pilot models, dealers will replace the “h” frame (seat rail assembly), on both front seats, and for affected mdx models, dealers will replace the driver’s seat frame assembly.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.