Recalls

Recall 2021377

  • CA Recall: Brakes
    Issue: this service campaign is for certain replacement rear brake drums that were sold by mitsubishi dealers. the brake drums may have been made with wheel stud holes that are too large. as a result, a wheel stud could spin when tightening the wheel nut. this can reduce the clamping force between the wheel and the brake drum. if this happens, the wheel may eventually come loose and could separate from the vehicle. note: this service campaign is not being conducted under the requirements of the motor vehicle safety act. safety risk: a wheel that cannot be properly tightened could increase the risk of a wheel separation. this could increase the risk of a crash. a wheel that separates could also hit another person or vehicle. corrective actions: mitsubishi will contact owners that may have had these brake drums replaced at a mitsubishi dealer. they will advise affected owners to take their vehicle to a dealer, who will replace any affected brake drum(s).

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.