Recalls

Recall 22950

  • USA Recall: The reduced master cylinder stroke results in failure tomeet the partial system failure requirements of fmvss 105, "hydraulic brakesystems". a further reduction in braking ability at a time when partial systemfailure has occurred could result in a vehicle crash.
    The brake pedal assembly has a pushrod pin that is too small and it is installed in the wrong position, causing an increased brake pedal ratio and a decreased master cylinder stroke.

    Corrective Action:
    Replace the brake assembly.

    Additional Notes:
    System: brakes: brake pedal assembly; fmvss 105.vehicle description: vans equipped with vacuum power brakes.note: fmvss 105 requires that hydraulic brake systems have an emergency featurewhich stops the vehicle under specified conditions. all hydraulic brake systemsare designed with a split system. each split works independently from the other.the partial system failure test of the fmvss is performed with one of the splitsystems inoperative.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.