Recalls

Recall 24846

  • USA Recall: Without governor operation, the driver could overspeed the engine, causing loss of control of vehicle speed.
    Incorrect torque on the governor input assembly could cause it to loosen and back out, interfering with the governor housing operation. also the torsion spring on the accelerator input was installed incorrectly and could dislodge, preventing the governor and accelerator from properly controlling the engine speed.

    Corrective Action:
    Assure proper assembly and torque on 8c8580 bolt, and proper installation of 7w9526 torsion spring.

    Additional Notes:
    System: diesel engines;6 cylinders, 6.6 liter turbo charged engines generating 165 to 290 horsepower.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.