Recalls

Recall 33257

  • USA Recall: If one of the resistors inside the ecm has a crack on the surface coating, the gas may cause corrosion of the resistor. this could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
    On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ecm) box emits sulfur as it cures.

    Corrective Action:
    Dealers will remove the inside lining material from the ecm box. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261.

    Additional Notes:
    Nissan recall no. p3163.customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.