Recalls

Recall 37184

  • USA Recall: Engine oil inside the sensor wiring connector could cause expansion due to the heat of the engine and could deform the sensor wiring connector. the connector may become disconnected, which could cause the engine to stall while driving and not be able to be restarted increasing the risk of a crash.
    On certain passenger vehicles, due to improper molding of the resin body of the crankshaft position senor installed on the engine block, engine oil may penetrate the seal and enter the sensor wiring connector. the wire harness connector may not be sufficiently attached to the locking tab of the sensor wiring connector.

    Corrective Action:
    Dealers will replace the crankshaft position sensor free of charge. the recall began on july 26, 2006. owners may contact toyota at 1-800-331-4331.

    Additional Notes:
    Toyota recall no. ssc 60g.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.